Next, learn how to do a good job in the maintenance of aluminum substrate splitter with small editor!
首先，就是它的一些内部零件的保养，而内部零件的保养主要是平时要定时地检查看是否有损坏的情况，如果有就应该及时地更换，并且添加润滑油，而定时地添加润滑油主要是为了减少设备的摩擦，以此降低设备磨损的现象出现。
First of all, it is the maintenance of some internal parts, and the maintenance of internal parts is to regularly check whether there is damage, if there is, it should be replaced in time, and add lubricating oil, and regularly adding lubricating oil is mainly to reduce the friction of equipment, so as to reduce the phenomenon of equipment wear.
首先分板机的操作员需要将要切割的PCB板确定好方向和正反面放到专用的分板治具中，放的时候要用手掌轻轻的向下压，确认放置到位后把分板治具的盖子盖紧。这时候一切都准备就绪，操作员按左手或右手边的绿色进料按钮，工作台就会自动进入到分板位置，点击分板机的软件按钮，注意览检时按钮是红色的，要观察每一个需要切割的位置是否正确，览检完成时工作台会自动退出。待览检完成无误后，先点软件上的停止按钮，此时按钮呈红色，等待几秒后就会变为绿色。
First of all, the operator of the dividing machine needs to determine the direction of the PCB to be cut and put the front and back sides into the special dividing fixture. When placing it, press down gently with the palm of your hand. After confirming that it is placed in place, cover the cover of the dividing fixture tightly. At this time, everything is ready. When the operator presses the green feed button on the left or right side, the worktable will automatically enter the position of dividing board. Click the software button of the dividing machine. Note that the button is red during the inspection. Observe whether each position to be cut is correct, and the workbench will exit automatically when the inspection is completed. After reading and checking, click the stop button on the software first. At this time, the button is red, and after a few seconds, it will turn green.
完成一系列的检测之后，分板机开始正式加工了，操作员要点击软件上的按钮，分板机开始工作，吸尘器，主轴，静电消除器等也会自动开起。气动加工时模板检测完成后会有主轴起动等待时间，连续加工时就没有主轴起动等待时间。在分板机工作时要注意观察切割位置是否正确，如果切割位置不正确，偏移或没在切割位置上，在机器左边和右边各有一个红色紧急停止按钮，此时只要按下其中一个机器就会马上停止，机器停止后需要找到工程师来解决。
After completing a series of tests, the distributor begins to process formally. The operator needs to click the button on the software, and the splitter starts to work. The vacuum cleaner, spindle and electrostatic eliminator will also start automatically. In pneumatic machining, there will be waiting time for spindle starting after the template detection is completed, while there is no waiting time for spindle starting in continuous machining. Pay attention to observe whether the cutting position is correct when the dividing machine is working. If the cutting position is not correct, offset or not in the cutting position, there is a red emergency stop button on the left and right sides of the machine. At this time, as long as one of the machines is pressed, the machine will stop immediately. After the machine stops, the engineer should be found to solve the problem.
分板机作为一个分割PCB板的设备，自身就是一个机器，操作人员要熟练使用它就必须要对分板机有一个了解，并知道正确的操作方法，这样才能在分板机的实际使用过程中安全生产，提高效率，避免意外发生。
对设备除了要进行日常保养之外，还要有良好的使用习惯，只有良好的使用习惯，加上定期的保养工作，才能有效地保护到铝基板分板机，延长它的使用寿命，不仅可以降低成本，更能大大地增加了工作的效率。
其次，铝基板分板机的日常清理的不可少的，可以先用水进行简单的擦拭，在使用过后如果没有及时清除板材所残留的杂物、脏东西，很容易会对机器造成不同程度的损伤；而它的外观更是要做到经常性的清洁与保养，给人美好的视觉效果。
As a device for dividing PCB board, the distributor itself is a machine. If the operator wants to skillfully use it, he must have an understanding of the splitter and know the correct operation method. Only in this way can the safety production, improve efficiency and avoid accidents occur in the actual use of the board splitter.
In addition to daily maintenance of the equipment, but also have good use habits, only good habits, coupled with regular maintenance work, can effectively protect the aluminum substrate splitter, prolong its service life, not only can reduce the cost, but also greatly increase the efficiency of work.
Secondly, the daily cleaning of aluminum substrate separator is indispensable. You can wipe it with water first. If you don't remove the debris and dirt left by the plate in time after use, it is easy to cause different degrees of damage to the machine; and its appearance is to do regular cleaning and maintenance, giving people a good visual effect.
市面上的铝基板分板机的价格虽不高，但想在使用过程中能够充分有效地发挥出它的最大优势，那么在平时的使用中还是有很多地方需要注意的。
Although the price of the aluminum plate splitter on the market is not high, but if you want to give full play to its greatest advantage in the process of use, there are still many places to pay attention to in the ordinary use.
